sddr-09

Here is my "little" problem:

I use Debian testing kernel version 2.6.26-1-686. When I connect my SanDisk Sddr-09 SmartMedia card reader dmesg prints:

[16735.796056] usb 1-2: new full speed USB device using uhci_hcd and address 9
[16735.853055] usb 1-2: configuration #1 chosen from 1 choice
[16735.868575] scsi5 : SCSI emulation for USB Mass Storage devices
[16735.875130] usb 1-2: New USB device found, idVendor=0781, idProduct=0200
[16735.875151] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[16735.875160] usb 1-2: Product: USB SSFDC
[16735.875166] usb 1-2: Manufacturer: SanDisk
[16735.875778] usb-storage: device found at 9
[16735.875791] usb-storage: waiting for device to settle before scanning
[16740.872129] usb-storage: device scan complete
[16740.872768] scsi 5:0:0:0: Direct-Access Sandisk0 ImageMate SDDR-0 0100 PQ: 0 ANSI: 0
[16744.644255] usb 1-2: reset full speed USB device using uhci_hcd and address 9
[16745.052228] usb 1-2: device not accepting address 9, error -32
[16745.164050] usb 1-2: reset full speed USB device using uhci_hcd and address 9
[16745.572048] usb 1-2: device not accepting address 9, error -32
[16745.684069] usb 1-2: reset full speed USB device using uhci_hcd and address 9
[16745.804059] usb 1-2: device descriptor read/64, error -32
[16746.028051] usb 1-2: device descriptor read/64, error -32
[16746.244066] usb 1-2: reset full speed USB device using uhci_hcd and address 9
[16746.364051] usb 1-2: device descriptor read/64, error -32
[16746.588228] usb 1-2: device descriptor read/64, error -32
[16746.692306] sddr09: could not read card info
[16746.692596] sddr09: could not read card info
[16746.692885] sd 5:0:0:0: [sdb] Test WP failed, assume Write Enabled
[16746.692900] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[16746.693104] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[16746.696477] usb 1-2: USB disconnect, address 9
[16746.808082] usb 1-2: new full speed USB device using uhci_hcd and address 10
[16747.220045] usb 1-2: device not accepting address 10, error -71
[16747.332059] usb 1-2: new full speed USB device using uhci_hcd and address 11
[16747.748046] usb 1-2: device not accepting address 11, error -71

Is the sddr-09 module in the standard Debian kernel or do I have to rebuild the kernel?

Or is there an other way to make this device work with Debian?

I hope someone can help me,

Floris